The “U Drill” is a ‘Cutting Tool’ used to drill or bore into the material to create holes, usually of circular cross-section. U-Drills cuts the material in a rotary fashion, having multipoint cutting tooth that makes perfect and deeper holes through thousands of repeated cuttings. Cutting machine forces the cutting edge against the material piece into fine desired carvings. For creating holes, drill bit is fixed to a drilling machine powered by electricity, cuts the material piece smoothly, typically by rotation leaving back the scrap or swarf. The drill bits come in many sizes and can generate various kinds of holes in different objects.
27.5mm u drill
The U-drill is a tool, the effective technique for drilling out cavities. It drills the material making a hole of desired level
Drilling cavity or hole in most materials.
Metal parts design.
Cutting diameter: 27.5mm or 1 inch
Type: Indexible Drill Bit
Spiral Length: 170mm
Material: Alloy Steel
Suitable for : WCMT Insert
Max drilling depth: 5xD
Tip Angle; 118°
Total Length: 235mm
High metal removal capacity rate.
High productive solution
21.5mm U Drill
The 21.5mm U-drill is blackened and hardened material used for drilling or for creating a required cavity. The four cutting ends per inserts increase the greater efficiency and cost savings, providing the superior outer finishes. The U-drill is non-corrosive, lesser deterioration of coating giving stable cutting and superior tool life.
The Some Of the Advantages
Higher cutting speeds
Less machine noise
Greater system rigidity.
Lower cutting forces
The Some of the Features
Size: 21.5 mm or .85 inch
Max depth: 68 mm or 2.67 inch
Shank diameter: 25 mm or 0.98 inch
Shank length: 56 mm or 2.2 inch
Overall length: 154 mm or 6.06 inch
Insert type: SPMG insert
31.5mm u drill
The 31.5 mm U-Drill has exclusive designs, and is used for the chip breaker. This drill the chip with perfection when machining materials like cast iron, stainless steel and steel. The U-drill geometry for the peripheral cutting ends gives distinguished cutting accuracy.
The Some of the Applications
3.Hard metal sheets
The Some Of The Features
Size: 31.5 mm or 1.24 inch
Flute length: 101.5 mm or 4 inch
Neck length: 121.5 mm
Shank diameter: 40 mm or 1.6 inch
Max radial adjustment: 0.55 mm
Flange diameter: 50 mm or 2 inch
Overall length: 186.5 mm
It cuts through harder and tougher materials.
High speed rotation cuts the material in less time.
The bit drills, create low noise.
Drills cut perfectly and prevent cracks and chips.
It is easily replaceable and low-cost.